C-POXY Wood Filler Grade Epoxy Adhesive
C-BOND CPOXY WOOD FILLER GRADE EPOXY ADHESIVE
C BOND CPOXY is two component modified, thixotropic epoxy adhesive system. When both components are mixed in recommended ratios and cured appropriately at room temperature, an excellent bond strength can be achieved with most of the substrates including glass, metals, reactive plastics, wood, textile and natural stones. Faster productivity can be achieved, if curing is performed at higher temperature between 40°C and 60°C. Curing at higher temperature is recommended to achieve optimum bond strength.
Applications
- Joint filling system for flooring
- Potting system for small electronics
- Wood industries
Processing
Surface preparation: The adherents must be thoroughly degreased with a good degreasing solvent (e.g. toluene, acetone trichloroethylene) and abraded with coarse emery paper or chemically etched. Inadequately pre-treated substrates may not bond satisfactorily.
Application: The mixed mass is applied by brush or spatula on the surface to be adhered. The mix must be used within its pot life.
Curing: Curing normally takes place at room temperature within about 24 hours depending on the ambient Temperature but may be accelerated by the application of heat.
Packaging
C BOND CPOXY is available in 1.8 kg bottles, 9 kg HDPE jerry cans and 45 kg HDPE carboys. Other packing may be considered on request.
Storage & Handling
C BOND CPOXY should be stored in a cool and dry place, preferably in a sealed container & should not be exposed to direct sunlight. This product has a shelf life of one year, if stored in its original container between 2°C and 40°C away from humidity and excessive heat.
Safety
Wear personal protective equipment (PPE), Avoid contact with the eyes and skin. In case of direct contact and irritation, it should be washed off immediately with soap and warm water. Avoid breathing vapors, mist or gas. Please refer to the Safety Data Sheet (SDS) of C BOND CPOXY for detailed safety instructions.
Advantages
- Good electrical insulating properties
- High bond strength
- Mechanical strength even in dynamic conditions
- Thermally stable and suitable to perform in extreme conditions
- Water and chemical resistant
Environmental friendly due to benzene free products
Color coded solvent packaging for ease of identification and inspection
Keeps the rubber and plastic gasket safe
Curbs bacterial growth
Non-toxic, soft paste like material that is non-flammable.
Easy to clean
Product Gallery
Become a distributor for
C BOND Adhesives
C BOND Adhesives is dedicated to providing the high quality synthetic rubber adhesives to our customers around the world.
We are always on the lookout for motivated, knowledgeable distribution companies that we can build long-lasting partnerships with. If you think your customers could benefit from any of the products in our range, get in touch now to find out more about how we can work together.
About Us
C BOND is amongst the most trusted brand in Synthetic Rubber Adhesive, PU Adhesive, PVA Adhesive, Epoxy Adhesive and PVC Solvent Cement products in India. Company is covered with prestigious ISO 9001:2015 & ISO 14001:2015
Our Products
Contact Us
- Survey No. 667, Near Jorana Tekra Road, B/H Kathwada Maize Product, Bhuvaldi Ta.Daskroi, Dist. Ahmedabad, Gujarat - 382430